Shovelbuck
Active Member
Last week, I dusted off my Pedersoli rolling block muzzleloader as I was going to use it for some hunts this season where a long shot could be needed.
I popped a couple caps on it to make sure the flash channel was clear and tried a third. Unfortunately, the third cap didn't fire, and after an inspection, I found out the firing pin was worn out.
I contacted Flintlocks Etc. who are the USA dealer for Pedersoli. I put a check in the mail on the 2nd and was surprised to receive my part today, the 6th! Dang, that's fast service.
If you ever need Pedersoli parts, I highly recommend them.:way:
http://www.flintlocksetc.com/
I popped a couple caps on it to make sure the flash channel was clear and tried a third. Unfortunately, the third cap didn't fire, and after an inspection, I found out the firing pin was worn out.
I contacted Flintlocks Etc. who are the USA dealer for Pedersoli. I put a check in the mail on the 2nd and was surprised to receive my part today, the 6th! Dang, that's fast service.
If you ever need Pedersoli parts, I highly recommend them.:way:
http://www.flintlocksetc.com/
